Wireless technology has widely spread lately and you can get connected almost anywhere; at home, at work, in libraries, schools, airports, hotels and even in middle to high class restaurants. 
The wireless networking is known as Wi-Fi (Wireless Fidelity) or 802.11 networking as it covers the IEEE 802.11 technologies. The major advantage of the Wi-Fi is that it is compatible with almost every operating systems, game devices and advanced printers. 

How does Wi-Fi work?

Alike cell phones, a Wi-Fi network makes use of radio waves to transmit information across a network. The computer should include a wireless adapter that will translate data sent into a radio signal. This same signal will be transmitted, via an antenna, to a decoder known as the router. Once decoded, the data will be sent to the Internet through a wired Ethernet connection. As the wireless network will work as a two-way traffic, the data received from the Internet will also pass through the router to be coded into a radio signal that will be receipted by the computer’s wireless adapter. 

Frequencies

A wireless network will transmit at a frequency level of 2.4 GHz or 5GHz to adapt to the amount of data that is being sent by the user. The 802.11 networking standards will somehow vary depending mostly on the user’s needs, as explained below: 

1. The 802.11a will transmit data at a frequency level of 5GHz. The Orthogonal Frequency-Division Multiplexing (OFDM) used enhances reception by dividing the radio signals into smaller signals before reaching the router. You can transmit a maximum of 54 megabits of data per second. 
2. The 802.11b will transmit data at a frequency level of 2.4GHz, which is a relatively slow speed. Also, you can transmit a maximum of 11 megabits of data per second. 
3. The 802.11g will transmit data at 2.4GHz but can transmit a maximum of 54 megabits of data per second as it also uses an OFDM coding. 
4. The more advanced 802.11n can transmit a maximum of 140 megabits of data per second and uses a frequency level of 5GHz. 

What is a Hotspot?

The term hotspot is used to define an area where Wi-Fi access is available. It can either be through a closed wireless network at home or in public places like restaurants or airports. 

As stated earlier, to be able to access hotspots, your computer should include a wireless adapter. If you are making use of an advanced laptop model, it must probably include a built-in wireless transmitter already. Else, you can purchase a wireless adapter that will plug into the PCI slot or USB port. Once installed, your system will automatically detect the Wi-Fi hotspots and request connection. Else, you should make use of a software to handle this task for you. 

Avanquest Connection Manager 
Download Link: http://www.freewarefiles.com/Avanquest-Connection-Manager---Free_program_43556.html 

CommView for Wifi 
Download Link: http://www.filecart.com/... 

Wirelessmon 
Download Link: http://search.wareseeker.com/wirelessmon-3.0-build-1001/ 

How to make a Wi-Fi connection

1. To start your connection with a wireless router, ensure that it is plugged into the internet connection point. 
2. You should turn on your external modem first before plugging the router to your computer via an Ethernet cable. 
3. Hence, switch on your wireless router until it fully starts up and open your internet browser. 
4. For Belkin users, enter http://192.168.0.1. 
5. For Linksys users, enter http://192.168.1.1 
6. If you are not using either service, enter http://192.168.2.1 
7. Then, you can file in your router’s username and password. 
8. Set the SSID (wireless capability) active 
9. Hence, type in the username and password provided by your ISP and select either WEP or WPA security. Then, choose a new passkey