IS MY HARD DRIVE GOING TO CRASH?

Most hard drive crashes give some early warning signs, providing you time to backup your data and, in some cases, correct the problem(s) before the hard drive fails completely. Pay attention to your hard drive's behavior and avoid the calamity of a hard drive crash. Here's what to watch for...

Heading For a Hard Drive Crash?                                                                                                                                                              

A hard drive may crash, literally, in a high-speed collision between moving mechanical parts within the drive. Inside a typical consumer hard drive, you have a stack of magnetic platters spinning at 5600 or 7200 rpms. Between the platters, needle-like read-write heads twitch from one sector of a platter to another faster than the eye can see. If head meets platter, both can be severely damaged.

Sudden shocks, such as falling a few feet, can cause a head to crash into a platter. So can electrical malfunctions that cause the head to drop suddenly onto the platter. If a speck of dust gets into the hard drive case through a filtered air-intake port, the head may crash into it because heads hover just a fraction of a millimeter above the rapidly spinning platters. 

Of course, modern hard drives are designed with shock-absorbing materials and other technologies to minimize the occurrences of physical crashes. Laptops, especially, are heavily protected against shock or head displacement due to sudden movement. Physical crashes happen randomly and with no warning, except sometimes for the "electrical malfunctions."

Signs of growing electrical malfunctions preceding a crash include slow or erratic read/write times; odd noises coming from the drive intermittently; or unusual delays in the drive's power-up cycle. You should be sensitive to such signals of an impending hard drive crash.

A more common cause of hard drive crashes is simple wear and tear on the electromechanical parts of the drive. The metal bearings upon which platters spin and the read/write head moves may burn out. Metal fatigue may cause a part of the read/write head mechanism to snap. Intermittent grating noises may or may not precede such failures.

Hard Drive Maintenance Is Important                                                                                                      

Defragmenting and optimizing the data files stored on a hard drive can extend the life of electromechanical parts. When a file is fragmented, with parts of it stored on different areas of the drive, the read/write head must move around excessively to collect all of its pieces. Corrupted files make the head work harder, too. So run your favorite disk optimizer utility, such as Advanced System Care Pro, at least once a week to prolong your hard drive's life.

Software glitches can also cause hard drive crashes. Software guides and commands the read/write head, telling it exactly where to write data. If there's a bug in the software some data may be written a bit "off track," not where it's supposed to go. Then it's unreadable; the place where it is written becomes a "bad sector," a spot on the hard drive that cannot be used. Microsoft Windows and other operating systems have built-in utilities that can test an entire hard drive for bad sectors and label them "do not use." Also, modern hard drives come with extra sectors that are activated for use when bad sectors are labeled off-limits. 

So it's a lot like taking care of a car. Routine preventive maintenance will help to extend the life of your drive, and attentive listening for any signs of trouble will help you avoid any losses.

Have you suffered a hard drive crash? Got some words of wisdom for avoiding one? Post your comment or question below...